Wooden Soap Mould Square 35 cm with Silicone Liner – 8 kg

Wooden Soap Mould Square 35 cm with Silicone Liner - 8 kg

Our huge wooden Bib soap mold comes with sturdy silicone liner and has a capacity of up to 8 kg of Cold Process Soap or Melt and Pour Soap. It is made for sturdy wood and a silicone inner mold. You can also use it for smaller batches. The heavy-duty, high-quality silicone lining makes the mold easy to remove and easy to handle.

Wooden soap mould with lid

This mold also comes with a lid that fits the mold exactly. This helps to protect cold-poured soap, or to prevent your melt and pour soap from sweating if you don’t have time to cut them right away.

How to use the wooden soap mold

The soap is removed from the mold by laying the mold on its side and sliding the soap onto the table. Cold Process Soap can be removed from the mold after a few days, depending on how soft your recipe is. Melt & Pour soap can be used once it is fully cured and cold. Remember that you can, of course, use the mold as a shallow mold by filling it only a few inches deep.

The size of the soap block with this mold is:
31.2 cm wide * 31.2 cm deep * 8.6 cm high.

To make the best use of the mold, each soap can have the following dimensions:
5.2 cm wide * 2.4 cm deep * 8.6 cm high

To obtain soaps with these dimensions, the block can be cut into these sizes:
6 pieces of soap vertical of 5.2 cm
and 13 horizontal of 2.4 cm

with this cutting you get : (6 * 13 =) 78 pieces of soap in total

The weight will be :
8000 grams / 78 soaps = 102 grams per soap