Tea Light Instructions

IN THE BOX

  • Candle wax
  • Candle dye
  • Waxlight wicks
  • Waxlight cups
  • Wick glue dots

YOU NEED

INSTRUCTIONS

STEP 1: PREPARATION

Place the wick glue dot at the bottom of the metal base of your wicks. Stick the wicks on the bottom of the tea light cups, making sure they are centered.

STEP 2: MELTING

Pour water into a double boiler or pan until it is about half full and bring to a boil. Then place a bowl for the wax in the pan of water and keep it on low heat. Pour all the wax and dye into the bowl and let it melt, stirring frequently.
You can also use a microwave to melt the wax. Heat the wax and dye for 30 seconds in a microwave-approved bowl, then stir. Repeat until the desired temperature is reached.
When the melted wax has reached a temperature of 70 °C, remove the bowl from the pan/microwave.

STEP 3: GIETING

Pour the wax at about 60-65 °C. Pour the wax carefully and slowly to avoid air bubbles. Make sure the wicks are tight and upright. Allow the candle to set for several days. Finally, cut the wick of your candle to 1 cm above the candle.