Soap Extruder

A soap extruder is a tool that can be used to make different shapes and designs with soap. The extruder can be used with cold process soap and pouring soap.

The color of the extruder may change per order depending on our stock (green, pink, black, etc.).

Using a soap extruder

• Prepare your soap by lightly uthardening it until it is “moldable. You can add dyes to the soap at this point if you wish.
• Attach the desired shape disc to the end of the soap extruder.
• Put the soap into the extruder by pushing/pouring it through the opening at the top.
• Hold the extruder at a 90-degree angle to your work surface and gently turn the top to extrude the soap through the disk.
• Use your hands or a tool to cut the extruded soap to the desired length.
• Continue extruding and shaping until you have made the desired number of pieces.
• Let it harden and then place it on or in your soap as a decoration.

Tips on using an extruder

• Use a consistent amount of pressure when extruding the soap to ensure even shapes and sizes.
• Clean the extruder thoroughly after each use to prevent residual soap from clogging the mechanism.
• Experiment with different shapes and sizes of extruder discs to create different designs.